Your current location：Home >> Products >> Connector >> DP Connector
DP Connector

MINI DP MALE SOLDER

  • Download
  • Orders

Feature

  • Housing pre-load are added to prevent produce conductor rebound and Improve product reliability
  • Shell spring is added and Contact with the customer’s panel to prevent the EMI phenomenon.
  • The spring chamfers on top and bottom of shell are the prevention of spring above the product top and bottom when male and female plug together.
  • RIB is added from Product shell tail to prevent floating when soldering.
  • Product DIP tails are increased 0.50 mm & two slots are added on housing bottom to avoid tin cohere on shell tails to cause connector remove from PVC when soldering. 
    Electrical
    • Contact Current Rating: 0.5A Min
    • Voltage Rating: 40V AC(rms)
    • Withstanding Voltages:500V AC (for 1 minute)
    • Insulation Resistance: 100M ohms Min.
    • Contact Resistance: 30m ohms Max.
    • Working Temperature: -25ºC ~ +85ºC

    Mechanical
    • Insulator Material: High Temperature Thermoplastic (UL94V-0 rated)
    • Contact: Copper alloy
    • Insertion Force: 39.2N Max
    • Withdraw Force: 9.8N Min
    • Durability mating cycle: 10,000 cycles.